ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า

L298N motor drive board module L298 stepper motor DC smart car robot accessories drive
(มีสินค้าในไทยพร้อมจัดส่งทันที)

Motor Drive Module L298N

ขับมอเตอร์ได้ 2 ตัวแบบแยกอิสระ สามารถควบคุมความเร็วมอเตอร์ได้ ใช้ไฟ 5 โวลต์ สามารถรับไฟเข้า 7-35 โวลต์ได้ มีวงจรเรกูเลตในตัว ขับกระแสสูงสุดได้ไม่เกิน 2A  

Motor Drive Module L298N

This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V, it can enable the onboard 5V logic power supply;afterthe power supply,don't input voltage in the interface+5V power supply,but you can lead the 5V for external use. 
when ENA enable IN1 IN2 control OUT1 OUT2 
when ENB enable IN3 IN4 control OUT3 OUT4

Applied cases: 
1 Driving stepper motor 
The connection of driving a common 4 line 2 phase electric motor is shown in below figure 
after enable ENA ENB 
Input the following driving timing from IN1-IN4,then the speed and direction of the stepper 
motor can be controlled

2 Driving DC motor 
Because the module is drived by double H bridge,it can drive two motors simultaneously. 
The connecting method is shown inbelow figure 
after enable ENA ENB 
You can imput the speed and direction of PWM signal drive motor 1 from IN1 IN2 
You can imput the speed and direction of PWM signal drive motor 2 from IN1 IN2 
The signal is shown in the figure 



 วงจรทดสอบใช้ battery 18650 lithium 2 ก้อน code test: Motor A,B วิ่งหน้าหลัง สลับกัน
Code basic:
//-----------------------------------------------------------------------------------------------

int IN1 = 4;
int IN2 = 5;
int IN3 = 6;
int IN4 = 7;
 
void setup()
{
 
 pinMode(IN1, OUTPUT);
 pinMode(IN2, OUTPUT);
 pinMode(IN3, OUTPUT);
 pinMode(IN4, OUTPUT);
}
 
void loop()
{
 digitalWrite(IN1, HIGH);
 digitalWrite(IN2, LOW);
 delay(2000);
 digitalWrite(IN1, HIGH);
 digitalWrite(IN2, HIGH);
 delay(500);
 digitalWrite(IN3, HIGH);
 digitalWrite(IN4, LOW);
 delay(2000);
 digitalWrite(IN3, HIGH);
 digitalWrite(IN4, HIGH);
 delay(500);
 digitalWrite(IN1, LOW);
 digitalWrite(IN2, HIGH);
 delay(2000);
 digitalWrite(IN1, HIGH);
 digitalWrite(IN2, HIGH);
 delay(500);
 digitalWrite(IN3, LOW);
 digitalWrite(IN4, HIGH);
 delay(2000);
 
 digitalWrite(IN3, HIGH);
 digitalWrite(IN4, HIGH);
 delay(500);
}

//------------------------------------------------------------------------------------------------

L298N motor driver board module
L298N motor driver board module
L298N motor driver board module
L298N motor driver board module
L298N motor driver board module
L298N motor driver board module
เงื่อนไขอื่นๆ
Tags

วิธีการชำระเงิน

บมจ. ธนาคารกรุงไทย สาขาโรงไฟฟ้าบางปะกง ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาบิ๊กซี ฉะเชิงเทรา 2 ออมทรัพย์
บมจ. ธนาคารกรุงไทย สาขาบิ๊กซี ฉะเชิงเทรา 2 ออมทรัพย์
พร้อมเพย์ สาขา- -
Scan this!
สนธยา ใจผ่อง
063-xxxxxx-8
Accept All Banks | รับเงินได้จากทุกธนาคาร
พูดคุย-สอบถาม