ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
MQ-2 smoke gas sensor module methane liquefied gas combustible gas
 
Introduction to the MQ-2 sensor:
The gas sensing material used in the MQ-2 gas sensor is tin dioxide (SnO2) with lower conductivity in clean air. When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases. The change in conductivity can be converted to an output signal corresponding to the gas concentration using a simple circuit. The MQ-2 gas sensor is highly sensitive to liquefied gases, propane and hydrogen, and is also ideal for the detection of natural gas and other combustible vapors. This sensor detects multiple flammable gases and is a low-cost sensor for a wide range of applications.

Module application:
It 
can be used for gas leakage monitoring devices in homes and factories. It is suitable for detection of liquefied gas, butane, propane, methane and smoke.

Module features:
1. High quality double panel design with power indication and TTL signal output Indication;
2. With DO switch signal (TTL) output and AO analog signal output;
3. TTL output valid signal is low level. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module.)
4. The analog output voltage is higher with the higher the voltage. 
5. Good sensitivity to liquefied gas, natural gas, city gas, and smoke. 
6, there are four screw holes for easy positioning;
7, product dimensions: 32 (L) * 20 (W) * 22 (H)
8, with long-term service life and reliable stability
9, fast response recovery characteristics
 
Electrical performance: 
Input voltage: DC5V Power consumption (current): 150mA 
DO output: TTL digital quantity 0 and 1 (0.1 and 5V)
AO output: 0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V 
Special reminder: sensor After power-on, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
เงื่อนไขอื่นๆ
Tags

วิธีการชำระเงิน

บมจ. ธนาคารกรุงไทย สาขาโรงไฟฟ้าบางปะกง ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาบิ๊กซี ฉะเชิงเทรา 2 ออมทรัพย์
บมจ. ธนาคารกรุงไทย สาขาบิ๊กซี ฉะเชิงเทรา 2 ออมทรัพย์
พร้อมเพย์ สาขา- -
Scan this!
สนธยา ใจผ่อง
063-xxxxxx-8
Accept All Banks | รับเงินได้จากทุกธนาคาร
พูดคุย-สอบถาม