ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output

Description:
The laser dust  sensor for the control of air purity. Allows to detect particles with diameter more than 0.3 μm, designed to measure PM2.5 and PM10. It has a fan that sucks the air. The system is supplied with the voltage from 4.7 V to 5.3 V, communicates via UART signal or PWM with Arduino or Raspberry Pi.

Pin Description:
NC Not connected.
1µm Measurement of particles PM2.5 from 0 to 999 µg/m3; PWM output.
5V Supply voltage: 4.7 V to 5.3 V.
25 µm Measurement of particles PM10 from 0 to 999 µg/m3; PWM output.
GND The mass of the system.
RXD Receiver of UART interface (3.3 V)
TXD The transmitter of the UART interface (3.3v)

Specification:
Supply voltage: 4.7 V to 5.3 V
Current consumption: 70 mA
Sensitivity: 0.3 microns
Measuring range: from 0 µg/m3 to 999.9 µg/m3
Communication: UART signal / PWM
7-pin connector: pitch 2.54 mm
Working temperature: from -10 °C to 50 °C
Atmospheric pressure: from 86 kPa to 110 kPa
Tile sizes: 71 x 70 x 23 mm

Sheet :

Sample:

PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
PM2.5 laser sensor SDS011 particle sensor dust sensor, digital output
เงื่อนไขอื่นๆ
Tags

วิธีการชำระเงิน

บมจ. ธนาคารกรุงไทย สาขาโรงไฟฟ้าบางปะกง ออมทรัพย์
ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาบิ๊กซี ฉะเชิงเทรา 2 ออมทรัพย์
บมจ. ธนาคารกรุงไทย สาขาบิ๊กซี ฉะเชิงเทรา 2 ออมทรัพย์
พร้อมเพย์ สาขา- -
Scan this!
สนธยา ใจผ่อง
063-xxxxxx-8
Accept All Banks | รับเงินได้จากทุกธนาคาร
พูดคุย-สอบถาม